Steering Lock
** Disclaimer: Use of this information is at your own risk. ** It seems like there is an uproar on the forums …
Bolts and Bits
I had to reshape a bolt so that it would fit in the exhaust housing. It’s a traditional housing and had I …
Duct Duct Goose..
Back to the drawing board….
Oil Pressure and Coolant Temp Revisted
What maybe of interest is that the secondary water temperature readings shows about ten to fifteen degrees more than the factory sensors (based on hondata …
June 2 2008, Test and Tune
A fun evening filled with rain and fireballs 🙂 Traffic to Race City was brutal. I imagine I lost 30-45 mins of track …
Where to brake?
When you’re traveling just past 230kmh where do you brake?
Smurferific
Being injured kinda sucks (fractured rib), but it does allow time for the smaller things to come together like expenses. I guess, …
Catch Can Revisited
I didn’t think the catch would catch that much gunk from the motor – I was wrong. It occurred to me …
Turbo Gaskets
It took some time to find the exhaust leak. At first I thought it was a shifter seal that may have popped …
What’s a little vibration? (Motor Mounts)
The engine dampener did nothing to stop the motor from rocking as we waited for motor mounts to come in. We’re starting to …
